Reactive PUR Adhesives
Powermelt
REACTIVE PUR PW 2306.25
Code: NC-GL-PU-002
Reactive PUR hot melt for wrapping PVC, aluminium and wood profiles with foil, paper and veneer. Once fully cured it resists water and heat up to 80°C and bonds even to difficult plastics such as PP and PE, with a short open time for fast lines.
Price on request
On request
- Manufacturer
- B.E.S. Kimya Kauçuk San. ve Tic. A.Ş.
- Country of origin
- Türkiye
| Form / colour | Solid / white |
|---|---|
| Viscosity | 30.000 ± 10.000 cps (140℃) |
| Density at 20°C | ≈ 1.1 g/cm³ |
| Heat resistance after full cure | Up to 80°C |
| Solubility in water | Insoluble |
| Operating temperature | 120-140℃ |
|---|---|
| Open time | 15 - 30 seconds |
| Bond strength | Very high after 24 - 72 hours |
| Full cure | Within 1 - 3 days through reaction with air humidity |
| Ignition point | > 300 °C |
|---|---|
| Signal word | Danger |
| Code | GHS08 |
| Classification | Resp. Sens. 1 (H334) · Skin Sens. 1 (H317) · Carc. 2 (H351) |
| Hazard-determining component | diphenylmethane-4,4'-diisocyanate (MDI), CAS 101-68-8, < 2% |
| Special warnings | Contains isocyanates · since 24 August 2023 adequate training is required before industrial or professional use · for professional users only · in poor ventilation use only with a suitable respirator filter (type A1, EN 14387) |
| Transport | Not classified as dangerous goods (ADR, IMDG, IATA) |
Specifications are taken from the manufacturer's technical data sheets and safety data sheets.
More in this category
Reactive PUR Adhesives